Einfache Trennlinie für Metallbolzen und -spur
Basisinformation
Modell: ZT-002
Produktbeschreibung
Einfache Trennlinie für Metallbolzen und -spur
Diese Metallschneidemaschine, die wir speziell zum Schneiden von Breitblech zu Dünnblech und dann zum Herstellen von Schienen und Bolzen entwerfen. Normalerweise könnte die Dicke innerhalb von 0,3 bis 1,0 mm kontrolliert werden. Hier ist eine der gesamten Schnittlinie Bilder für Ihre Referenz:
Stahlspaltanlage Produktionsprozess
Abwickelhaspel, Führungsvorrichtung, Schneidvorrichtung, Schneidvorrichtung, Längenmessvorrichtung, Verlängerungsvorrichtung, Aufwickelhaspel, Bandwagen, hydraulische Station, SPS-Steuersystem.
Produktionsparameter:
Processing material: |
ALUZINC, or ALUMINIUM or STAINLESS STEAL |
Material thickness |
0.5-0.8mm |
Material hardness |
195 mpa---350 mpa |
Materisl width |
Max 1000 mm |
Inner diameter |
508mm |
Max out diameter |
1200mm |
Max weight |
Max weight: 5 T |
Configurations |
Decoiler, Slitting device, Cutting device, Recoiler |
||
Decoiler specifications
|
Max coil weight: |
5 T |
|
Inner diameter: |
GI 508mm |
||
Max out diameter |
1250mm |
||
Hydraulic station power: |
3 kw |
||
Decoiler speed: |
0-25m/min |
||
Finished product specifications:
|
width tolerance: |
0.5mm |
|
Min slitting width: |
25 mm |
||
Forming steps |
10 rollers |
||
Shaft diameter |
40mm |
||
Design type |
Memorial arch |
||
Slitting device specifications |
Slitting speed: |
0-25mm/min |
|
Driving motor: |
15 Kw |
||
Slitting shaft diameter |
Ф100mm |
||
Shearing blade |
9 pieces |
||
Max slitting pieces |
10 pieces |
||
Min slitting width |
25 mm |
||
Shearing blade material: |
9CrSi |
||
Pinching roller: |
2 couples |
||
Cutting device.
|
Cutting thickness |
0.3-1.0mm |
|
Cutting length |
500-4000mm |
||
Cutting width |
900-1250mm |
||
Cutting speed: |
4-15m/min |
||
Recoiler specifications:
|
Max coil weight: |
5 T |
|
Inner diameter: |
508/610mm |
||
Max out diameter: |
1250mm |
||
Recoiler motor: |
7.5Kw |
||
Hydraulic station power: |
3Kw |
||
Recoiler speed: |
0-25m/min |
||
|
Voltage |
220v/60hz/3ph(or as required) |
|
l Standardausrüstung der Maschine
5T decoiler |
1 set |
Slitting device |
1set |
Extension device |
1 pc |
5T coiler |
1 set |
Coil car |
1 pc |
Hydraulic Station |
2pcs |
|
|
Delivery Terms: - Shipment within 60 days after receipt of down payment. Payment Terms: Payment of the contract with following schedule: - 30%: The payment shall pay by T/T the downpayment to the Seller within 15 days after the signature of the Contract. The Contract then comes into effect. - 70%: The buyer shall pay to the seller 70% of total contract amount before the seller`s ship the machine to XINGANG, CHINA. Equipment Manufacturing and Inspection/Test 1. The Seller manufactures the equipment according to the relevant standards strictly and tests the equipment according to the technical documents. 2. The Buyer shall inspect and test the commodities at the Seller`s factory at the Seller informs to confirm their conformity to the Contract Specifications. If the Buyer fails to arrive on time, the Seller shall have the right to deliver the goods according to the date stipulated in the Contract. T Technical Documents The Seller shall submit the following documents in English: 1. Foundation Plan (including the arrangement of water, electricity and air etc.) 2. Arrangement Plan 3. Operation Instruction (including the structure diagrams of the equipment, operation instruction, maintenance and trouble shooting, safe rules, consumable parts list and purchased parts list) I Installation, Commissioning, Test and Training 1. The engineers from the Seller shall supervise the installation on site and fulfill the commissioning. They should start off within 10 days after they get the information from the Buyer. 2. The Seller trains the operators of the Buyer during the commissioning 3. Commissioning: about 3 engineers in 30 days. 4. The Buyer shall pay for the international air tickets and the local, such as board and lodging, daily transportation, communication,Insurance, etc. The Buyer shall pay USD 50 /day /person to the Seller for the commissioning. 5. The Buyer shall prepare an interpreter for better communication between the two sides. |
Hier sind einige maschine bilder für ihre referenz :
Dies ist das SPS-Steuerungssystem, hier können Sie die Arbeitsgeschwindigkeit der Maschine, den Schneidprozeß und andere einstellen.
Dies ist der Abwickler, durch diesen können Sie Spule laden.
Dies ist eine sehr einfache Trennlinie, diese Maschine ist sehr gut für diejenigen, die nur Fabrik am Anfang zu bauen und haben ein kleines Budget. Diese Spaltlinie ist sehr wirtschaftlich.
Produktgruppe : Linie/Cut Länge Linie schneiden